![]() Many computers provide a socket such as this for connecting external mass storage devices. If you have never heard of eSATA, then it is simply SATA with a special plug and socket arrangement for connecting external storage devices. These docking stations are compatible with XP, Vista, Windows 7, MAC, and Linux operating systems. It connects through a USB 2.0 port, and does not have an integrated card reader. Model 875D is the basic version known simply as 'IDE / SATA Docking'. It is a backup and cloning solution with an integrated card reader, supporting CF, SD, XD, MS, and Mini SD, T-Flash, and Micro SD formats up to 32 GB in size. The 'All in One HDD Docking' is a docking station, which accepts 2.5' and 3.5' IDE and SATA hard disk drives (HDD) up to 2 TB in size. IDE / SATA Docking Station Adapter Power Supply IDE / SATA Docking Box and Packaging Multi Function Hdd Docking Model 893u2is Manual Download Multi Function Hdd Docking Model 893u2is Manual InstructionsAll in One HDD Docking IDE Not Working This Article Continues.All in One HDD DockingĪll in One HDD Docking Station How to Use Instructions In 'My Computer', you should see a 'Removable Drive' icon. When you switch it ON, your computer will automatically detect the device connected to the USB port and install the necessary drivers. Very gently align the drive to mate with the sockets on the dock station, and then apply a small amount of force so that the connectors join and make an electrical connection.Īfter seating the drive into the dock station, connect the power supply and USB cables, and switch ON the dock station. It seems to be operating fine with this docking station. I am using the Maxtor DiamondMax 21 hard drive, which also came from eBay as a refurbished drive. ![]() The docking station connector usually ignores the pins for the jumper settings and they do not connect to anything. If the power connectors align and mate properly, then the IDE connector will follow and align as well. Desktop Hard Disk PositionĪ desktop hard disk such as PATA will connect in the centre. Turn over the hard drive so that the Molex power connectors on the drive and the dock station are on the same side. Click on the image above to see exactly where a PC hard disk would connect. ![]() It is therefore a simple matter of aligning the drive and plugging it in. You do not need to install the software in this CD, if all you will be doing is accessing the drive as a mass storage device.Īs you can see, the printed circuit board (PCB) has plug connectors for the IDE and power ports, which mate with their respective counterpart connectors on the hard disk. There is an accompanying CD with software, which is required only if you wish to use the one touch backup and cloning functionality. Usually, the computer automatically detects a mass storage device connected to the USB port and loads the necessary drivers. Make sure you have installed a hard drive in the relevant slot, connected the power supply and USB cables, and then switch the unit ON. You are not required to install a driver, unless your computer operating system is Windows 2000 or earlier. Supports all brands of 2.5-inch and 3.5-inch IDE / SATA hard disks ( compatible with old hard disks ) and SSD solid state drives. ![]() Plug the bare disk directly, no installation required, easy to use. Main Features: USB2.0 TO IDE / SATA dual-disk multi-function hard disk base.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |